7 Common King Pellet Stove Problems: Causes & Fixes (2024)

Encountering issues with your King pellet stove? This comprehensive guide addresses common problems like ignition failures, auger malfunctions, overheating, excessive smoke, and unusual noises. Learn how to troubleshoot and resolve these issues to keep your stove running efficiently and enjoy a warm, cozy home.

Let’s troubleshoot this together. If your pellet stove isn’t igniting, it might be as simple as the hopper being empty. Fill it up and give it a few minutes. If that doesn’t work, check the venting for blockages – sometimes the pressure switch senses a lack of airflow and shuts everything down.

If your auger isn’t moving, first, check the hopper again. If it’s full and the auger still won’t budge, there could be a crack in the hose running from the firebox to the switch, the hose barb might be clogged with ash, or the vacuum switch itself could be faulty.

And if you’re having trouble with the igniter, check for physical damage. If it’s broken, it won’t light the pellets. If there’s no visible damage, you might need to adjust the feed rate settings on your stove. This can help fine-tune the pellet delivery for optimal burning.

Table of Contents

7 Common King Pellet Stove Problems and How to Fix Them

King pellet stoves are renowned for their efficient and reliable heating performance, but like any appliance, they may occasionally encounter issues. Understanding these common problems and their solutions can help you keep your stove running smoothly and ensure a warm and comfortable environment.

1. Pellet Stove Not Igniting

A pellet stove that won’t ignite can be caused by a few different factors. First, check the hopper to ensure it’s filled with pellets. The stove cannot ignite without fuel. Second, inspect the venting system for blockages, as a lack of airflow can trigger safety mechanisms that prevent ignition. If the venting is clear, the igniter itself may be faulty and need replacement. To replace the igniter, disconnect the power to the stove, remove the access panel, and carefully disconnect and replace the old igniter with a new one.

2. Auger Not Feeding Pellets

If the auger isn’t delivering pellets to the burn pot, it could be due to a malfunctioning auger motor, a jam in the auger, or a problem with the vacuum switch or connecting hose. To troubleshoot, first, check the auger motor for power and ensure it’s turning freely. If the motor is working, inspect the auger for any obstructions and remove them carefully. If neither of those solves the issue, examine the vacuum switch and hose for cracks or clogs. Replace or clean them as necessary.

3. Pellet Stove Overheating

Overheating can occur due to restricted airflow, a clogged exhaust system, or an overly warm room. To prevent overheating, ensure the air intakes is open and the air filter is clean. The exhaust system should also be inspected and cleaned regularly to remove any soot or debris that could impede airflow. If the room is already warm, adjust the thermostat or open windows to regulate the temperature and reduce the strain on the stove.

4. Pellet Stove Producing Excessive Smoke

Excessive smoke typically indicates incomplete combustion or venting problems. Using high-quality pellets with low ash content can help minimize smoke production. Additionally, ensure there’s adequate airflow by checking the air intakes and filter, and adjusting settings as needed. If the exhaust system is blocked or undersized, it can cause smoke to back up into the room. Clean the exhaust system regularly and consult a professional if you suspect the vent size is inadequate.

5. Pellet Stove Shutting Off Unexpectedly

Sudden shutdowns can be caused by an empty hopper, a malfunctioning pressure switch, or a low thermostat setting. Make sure the hopper is always filled with pellets to maintain a consistent fuel supply. If the pressure switch is faulty, it may need cleaning or replacement. Check the thermostat setting and raise it if you want the stove to continue running.

6. Pellet Stove Making Loud Noises

Unusual noises like grinding, squealing, rattling, or humming could point to issues with the auger motor, combustion blower, or exhaust system. Inspect the auger motor for obstructions and replace it if it’s worn out. The combustion blower should be cleaned regularly and replaced if the fan blades are damaged. Check the exhaust system for loose connections and tighten them to prevent vibrations and noise.

7. Ash Buildup

Regularly cleaning the ash from your pellet stove is essential for optimal performance. Ash can accumulate in the burn pot, ash pan, and heat exchange surfaces, hindering airflow and combustion efficiency. Follow the manufacturer’s instructions for cleaning frequency and procedures, and use high-quality pellets to minimize ash production and the need for frequent cleaning.

King Pellet Stove Draft Fan Blinking!

A blinking draft fan on your King pellet stove typically signals a problem with the combustion process or airflow. The draft fan is responsible for pulling air into the burn pot and expelling exhaust gases through the venting system. If the fan is blinking, it could mean that there is a blockage in the venting system, a malfunctioning pressure switch, or an issue with the combustion blower.

To troubleshoot this issue, first check the venting system for any obstructions, such as soot buildup or debris. Ensure the exhaust pipe is clear and properly connected. Next, examine the pressure switch and the hose that connects it to the firebox. Look for any cracks or clogs and clean or replace them as necessary. If the problem persists, the combustion blower might be dirty or damaged and may need to be cleaned or replaced.

King Pellet Stove Room Fan Not Working!

The room fan in your King pellet stove is responsible for circulating warm air throughout your space. If the fan isn’t working, it could be due to a few reasons. The most common cause is a tripped circuit breaker or a blown fuse. Check your electrical panel and reset the breaker or replace the fuse if necessary. If the power supply is fine, the fan motor might be faulty and require replacement.

Before replacing the motor, check the wiring connections to ensure they are secure and not damaged. Sometimes, a loose or damaged wire can disrupt the power supply to the fan. If you’re not comfortable working with electrical components, it’s best to call a qualified technician to diagnose and fix the issue.

King Pellet Stove Exhaust Fan Surging!

The exhaust fan in your King pellet stove helps to maintain proper airflow and ensure efficient combustion. If the fan is surging, it means that it’s turning on and off repeatedly or changing speeds erratically. This can be caused by a few factors, including a dirty or obstructed exhaust vent, a faulty pressure switch, or a problem with the control board.

To address this issue, start by inspecting and cleaning the exhaust vent. Remove any soot buildup or debris that could be restricting airflow. Check the pressure switch and the hose for any cracks or clogs. If they appear damaged, replace them. If the problem continues, the control board might be malfunctioning and need to be replaced by a qualified technician.

King Pellet Stove Draft Fan Setting

The draft fan setting on your King pellet stove determines the speed at which the fan operates. It’s important to set the draft fan speed correctly to ensure optimal combustion and efficient heating. The ideal setting can vary depending on the model of your stove, the type of pellets you’re using, and the layout of your home.

To adjust the draft fan setting, refer to your owner’s manual for specific instructions. Typically, you’ll need to access the control panel and use the buttons or dials to adjust the fan speed. Start with a low setting and gradually increase it until you achieve a clean and efficient burn. You can monitor the flame through the viewing window to assess the combustion quality. If you see dark smoke or soot buildup, the draft fan speed may need to be increased. If the flame is too high or noisy, the speed may need to be decreased.

Remember, it’s crucial to consult your owner’s manual for the recommended draft fan settings for your specific King pellet stove model. If you’re unsure about how to adjust the settings or if you’re experiencing persistent problems, don’t hesitate to contact a qualified technician for assistance.

7 Common King Pellet Stove Problems: Causes & Fixes (1)

How to Adjust Feed Rate on King Pellet Stove?

Adjusting the feed rate on your King pellet stove is crucial for optimizing heat output and fuel efficiency. It allows you to fine-tune how many pellets are delivered to the burn pot, directly impacting the flame intensity and warmth generated.

Tools Required:

  • Owner’s manual (for model-specific instructions)

Steps:

Step 1: Locate the control panel on your King pellet stove. The location may vary depending on the model, but it’s typically on the top or front of the stove.

Step 2: Power on the stove and let it run for a few minutes to reach operating temperature.

Step 3: Access the feed rate adjustment menu. This is usually done by pressing a combination of buttons on the control panel, as outlined in your owner’s manual.

Step 4: Use the up and down arrows or other designated buttons to increase or decrease the feed rate. The display will show the current feed rate in pounds per hour.

Step 5: Make small adjustments to the feed rate and observe the flame. A higher feed rate will result in a larger, hotter flame, while a lower feed rate will produce a smaller, cooler flame.

Step 6: Fine-tune the feed rate based on your desired heat output and the type of pellets you’re using. Remember, different pellet brands may have varying burn characteristics, so you may need to experiment to find the optimal setting.

Step 7: After adjusting the feed rate, allow the stove to run for a while to stabilize and observe the results. You can make further adjustments if needed.

How to Light a Pellet Stove Manually?

If your King pellet stove doesn’t have automatic ignition or if you prefer a manual approach, you can easily light it using a few simple steps.

Tools Required:

  • Lighter or matches
  • Pellet stove gel fuel

Steps:

Step 1: Open the hopper lid and ensure there are enough pellets in the hopper.

Step 2: Locate the burn pot at the bottom of the hopper.

Step 3: Apply a small amount of pellet stove gel fuel to the pellets in the burn pot. The gel fuel acts as an accelerant to help ignite the pellets.

Step 4: Light the gel fuel with a lighter or match. Be careful not to touch the flame to any other parts of the stove.

Step 5: Allow the gel fuel to burn for a few minutes, which will ignite the pellets.

Step 6: Once the pellets are ignited, close the hopper lid and monitor the flame through the viewing window. You can adjust the airflow settings if needed to achieve a steady burn.

It is vital to prioritize safety. Never leave the stove unattended while lighting it, and always keep flammable materials away from the stove. If you have any concerns or questions, consult your owner’s manual or seek assistance from a qualified technician.

Common Questions and Answers

Why Does My King Pellet Stove Keep Shutting Off?

Several factors could cause your King pellet stove to shut off unexpectedly. First, ensure the hopper is full of pellets, as the stove will automatically shut down if it runs out of fuel. Second, check the pressure switch and the connecting hose for any blockages or damage, as this could trigger a safety shutdown. Third, verify that the thermostat isn’t set too low, as the stove will turn off once the desired temperature is reached. Finally, inspect the exhaust vent for obstructions, as inadequate airflow can lead to overheating and shutdown. If you’ve checked all these factors and the problem persists, it’s advisable to contact a qualified technician for further diagnosis and repair.

How Often Should I Clean My King Pellet Stove?

The frequency of cleaning depends on how often you use your stove and the type of pellets you burn. As a general guideline, it’s recommended to clean the burn pot, ash pan, and heat exchange surfaces daily or every other day during heavy use. Weekly cleaning is usually sufficient for moderate use. During periods of infrequent use, cleaning every few weeks may be enough. However, always refer to your owner’s manual for specific recommendations based on your stove model and usage patterns.

Can I Use Any Type of Pellets in My King Pellet Stove?

While King pellet stoves are designed to burn a variety of wood pellets, it’s crucial to use high-quality pellets that meet the manufacturer’s recommendations. Look for pellets made from hardwood with low ash content, as they tend to burn cleaner and produce less residue. Avoid using pellets made from softwood or those containing additives or binders, as they can negatively impact combustion efficiency and lead to increased maintenance. Using premium pellets not only ensures optimal stove performance but also helps prolong the lifespan of your appliance.

What Should I Do If My King Pellet Stove Is Making a Clicking Noise?

A clicking noise from your King pellet stove could be due to several reasons. One possibility is that the auger is struggling to feed pellets, which can happen if the pellets are jammed or the motor malfunctioning. Another potential cause is debris or obstructions in the burn pot or airflow system, causing the stove to cycle on and off. Inspect the auger, burn pot, and airflow system for any blockages and clear them if necessary. If the problem persists, it’s best to consult a qualified technician to diagnose and address the issue.

Can I Convert My King Pellet Stove to Burn Corn?

King pellet stoves are not designed to burn corn, and attempting to do so can void your warranty and potentially damage the stove. Corn has different combustion properties than wood pellets and can lead to increased ash buildup, clogging of the auger and burn pot, and inefficient burning. Burning corn in a pellet stove can also release harmful emissions and pose a fire hazard. Always use the recommended fuel type specified by the manufacturer to ensure safe and optimal performance.

7 Common King Pellet Stove Problems: Causes & Fixes (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Arielle Torp

Last Updated:

Views: 5747

Rating: 4 / 5 (61 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Arielle Torp

Birthday: 1997-09-20

Address: 87313 Erdman Vista, North Dustinborough, WA 37563

Phone: +97216742823598

Job: Central Technology Officer

Hobby: Taekwondo, Macrame, Foreign language learning, Kite flying, Cooking, Skiing, Computer programming

Introduction: My name is Arielle Torp, I am a comfortable, kind, zealous, lovely, jolly, colorful, adventurous person who loves writing and wants to share my knowledge and understanding with you.